Installation Instructions
=========================

1. Please connect the mini USB port of the Aruba MAS device to the USB port of the System PC/Laptop, using the USB Type-A to USB Type-B cable.

2. Please go to Device Manager. 

3. "Aruba Networks USB to UART Bridge Controller" is displayed under Other devices, with an exclamation mark (!).

4. Run the USB Driver Installer Application "ArubaCP210xVCPInstaller" from the location "Aruba_VCP_Win_XP_Vista_7\Aruba Networks\MCU\CP210x\Windows_XP_Vista_7".

5. Based on  "User Account Control" settings of the System PC/laptop, Windows may display a dialogue box asking "Do you want to allow the following program to make changes to the computer". Please press Yes to continue.

6. Now the installer will prompt to select the Installation Location. One can choose the default location or select another location. Then please press Install to continue.

7. Windows will display "Installation completed successfully" in a dialogue box, Press OK to continue. It may be needed to unplug and re-plug the USB cable on System PC/Laptop, after the first time installation of the Device Driver. 

8. Windows will continue the Device Driver Installation in the background and display that Aruba Networks USB to UART Bridge Driver is installed.

9. Please go to Device Manager once again 

10. "Aruba Networks USB to UART Bridge" is displayed without exclamation mark under Ports (COM & LPT), on one of the COM port(s). Please note down the COM port number for the device.

11. Please use preferred terminal emulation application and select COM port noted in Step 10, with baudrate of 9600.

12. The Serial console messages from Aruba MAS device should appear in terminal emulation application.


Uninstallation Instructions
===========================

1. Go to Control panel -> Programs and Features. (In Windows XP, this is "Add or Remove Programs")

2. Look for "Aruba Networks USB to UART Bridge (Driver Removal)" and select

3. Right click and press "Uninstall/Change"

4. Uninstaller will prompt the user to confirm the uninstallation, Please press Unistall to continue

5. A Reboot of the System PC/Laptop may be required to complete the Uninstallation.


Known Caveat(s)
==============
 
1. In some systems running 64 bit Windows 7 and Vista installations, the driver may not get uninstalled by the steps given in Uninstallation Instructions. 
   Aruba MAS device may still be detected correctly even after executing Uninstallation Instructions. 
   In such cases Uninstallation can be done from Device Manager. 
   Please go to Device Manager, under Ports(COM & LPT), right click on the "Aruba Networks USB to UART Bridge" and press Uninstall. 
   In the "Confirm Device Uninstall" window, select "Delete the driver software for this device" and press OK. 
   Unplug and re-plug the Aruba MAS device in USB port on System PC/Laptop. 
   Now "Aruba Networks USB to UART Bridge Controller" is displayed under Other Devices with an exclamation mark (!).




